READ THIS FIRST:
Please check the Microsoft BitLocker encryption setting on your computer BEFORE starting this process. If the BitLocker is turned ON and you do NOT have the key, you will lock up your hard drive and lose all of your data!!
Follow these instructions to check and disable the BitLocker if you do not intentionally have it turned on.
Please follow the steps below to download and update or install Iris M software.
2. When the download has completed, open the Downloads folder
3. Copy the "MA+v3.0+Install.zip” file to a USB device (Optional)
4. Take the USB drive to the RDI Acquisition Device (Optional)
5. Copy the “MA+v3.0+Install.zip” file to the desktop of the RDI Acquisition Device (Optional)
6. Right-click on the “MA+v3.0+Install.zip” file and select “Extract All…”
NOTE - The extracted files must be on the local computer. You cannot install from the USB drive or a network location.
7. Confirm the default desktop destination by clicking “Next”
8. When extraction is complete, the extracted file location should open automatically
9. Right-click on the “setup.exe” file
10. Left-click on the “Run as administrator” action
11. Follow the on-screen prompts to complete the software upgrade or installation
The process will be identical for either of the two Software Download links. When you are installing the software, you will be presented with the following selection screen (see the attachments for a larger version if needed). You will only need to install the components necessary for the specific installation as described below:
NOTE - The download contains the newest version available. In some cases the version references above may not exactly match the version in the download which will always be the newest version. In any case, the instructions remain the same regardless of the version that you download.