Modal Amplified™
FAQs for features introduced in Modal Amplified™
Please see this link for our currently recommend Modal Hammers: Modal Hammers from PCB Piezotronics Related Articles Do I need to do anything s...
Mon, 23 Oct, 2023 at 11:05 AM
Yes. You will have to Rename the DAQ Hardware as described below. Modal Amplified Software – Renaming Hardware 1) Install Modal Amplified software...
Mon, 22 Jul, 2024 at 6:26 PM
Installing new software or updating your existing version will follow the same procedure as described below: READ THIS FIRST: 1. Before starting th...
Tue, 14 May, 2024 at 2:00 PM
Connection Descriptions: The Main Power cord is supplied with the Modal Amplified Kit. Connect it to the front panel and then connect it to a 100-240V...
Tue, 23 Jul, 2024 at 9:30 AM
New users: If you have received the Modal Amplified system as an "Add-On", it was not purchased at the same time that you purchased the Iris M...
Mon, 22 Jul, 2024 at 3:42 PM
The Modal Amplified hardware will work with RG-58 Coax Cables. Using other cables may result in data transfer and data quality issues. Related Arti...
Mon, 23 Oct, 2023 at 11:04 AM
When using Modal Amplified, it is not necessary to define an Impact Location. You should make the impact in the same location, same direction, and with the ...
Thu, 22 Feb, 2024 at 5:28 PM
Yes. There is no need to reconfigure or reacquire your data to change ROI locations or shapes. You can even use what you learn from the first locations to h...
Thu, 22 Feb, 2024 at 5:31 PM